Audio

Live paging to every zone, from one panel.

Smart Pi MIC

Live paging

Speak to every zone.
From one panel.

Smart Pi MIC puts live paging at your fingertips. Illuminated buttons choose where your voice goes, the touchscreen shows exactly what is selected and when you are live, and a chime gets everyone listening first. Set it up once in a browser, and it is ready for every announcement, every shift.

Made for the person at the microphone

Select. Chime. Speak.

Press the zones you want, press TALK, and speak. Eight physical buttons across three pages give you up to 24 zones, and your selections stay put as you move between pages.

01

Pick where it goes

Every button lights up in its zone’s colour and shows its name on screen, so you can see at a glance exactly where your announcement is heading.

02

Get their attention

A chime plays before you speak. Choose one from the library or upload your own, and hear it on the panel’s speaker too.

03

Know when you are live

The screen shows each stage, from connecting to chime to live, so you never start talking too early.

Smart Pi MIC virtual panel during a live page: TALK lit, SPEAK NOW with a running timer, and transmit levels for each selected zone
A live page in the browser’s virtual panel: TALK lit, the timer running and a level for every zone. Sample configuration.

The TALK button

Hold to talk, or tap to talk

Choose how TALK works for the people using it. Hold to talk keeps the page open only while the button is held, the way a classic paging mic works. Click to start, click to end latches the page open, so longer announcements leave both hands free.

Hold to talk

Press and hold TALK to speak, and let go to finish. Nothing stays open by accident.

Click to start, click to end

Tap once to start the page and again to end it. The screen shows how long you have been live.

A colour for every state

Set the TALK lamp colour for idle, ready, connecting, chime, live, fault and diagnostics. The physical button and the browser’s virtual panel follow the same colours, and black switches the lamp off.

Smart Pi MIC TALK settings: talk button behaviour and a lamp colour for each paging state
TALK behaviour and lamp colours, set per state. Default colours shown.

Fits your system

One panel, wherever your speakers are

Pair MIC with a Smart Pi DSP and it becomes that system’s dedicated paging station. Or mix and match local Dante zones, SIP destinations and zones on DSPs elsewhere, all from the same buttons.

DSP Partnered: MIC is the paging station for a Smart Pi DSP. Pick the zones, and the DSP sends your voice over Dante to the NAMs in every one of them.

DSP Partnered

MIC and your Smart Pi DSP work as one. Zone names and colours stay in sync automatically over AES70, so the panel always matches the system.

Mixed

Give every button the route it needs. Combine up to eight Dante channels with SIP destinations, including NAMs paged directly over SIP, and zones on remote DSPs, across up to 24 paging zones.

Dante audio

Send your voice to local zones over Dante, and listen back through a Dante return.

SIP audio

Page a Smart Pi NAM directly through its SIP module, or reach remote sites and DSPs across routed networks through the Smart Pi SIP Server.

AES70 control

The open AES70 standard keeps settings, zone names and control in step across the system.

Set up in a browser

Make it yours

Name every zone the way your team talks about it, give each one a colour, and arrange the pages around how people actually work. It is all done in a browser, with a live virtual panel that shows exactly what the operator sees.

Names that fit the site

Organise pages by platform, level or building. Zones on a DSP take their name and colour straight from it, so there is only one label to maintain.

See what the operator sees

The browser’s virtual panel mirrors the real one, so supervisors and support can see what is selected at any moment.

Smart Pi MIC button configuration: panel preview, button list and the label, colour and Dante route for Platform 1
Button configuration: name, colour and route for every button, with a live preview of the panel. Sample configuration.

Voice processing

Every word, clearly heard

Busy concourses and echoing halls are hard on speech. MIC shapes your voice before it leaves the panel, with gain, a high-pass filter, parametric EQ, compression and a limiter, plus noise reduction, de-essing and feedback suppression where supported. Tune it to the space once, and every announcement sounds its best.

Smart Pi MIC voice processing chain and four-band parametric EQ shaped for speech
The voice chain and a four-band EQ shaped for speech. Sample settings.

Around the back

One cable to install. Fibre when it is far.

MIC runs on Power over Ethernet, so a single network cable carries its power, its audio and its control. There is no power supply to find a socket for on the desk.

PoE powered

Plug into a PoE switch port and the panel starts up, ready to page. One cable, one connection to make.

Fibre for long runs

Two SFP slots take fibre modules when the control room is a long way from the network, beyond the reach of copper.

A switch built in

Two RJ45 ports and two SFP slots share an onboard network switch, so you choose the connection that suits the site.

Rear three-quarter view of Smart Pi MIC showing two RJ45 network ports and two SFP fibre slots
The rear of the panel: two RJ45 ports and two SFP slots. Product render.

Easy to run, easy to support

Built for the long haul

Hear what is happening

Listen in on the panel’s own speaker, from a Dante return or a local or SIP source, with level and mute at hand.

See the connection

Network status, switch links and service information are a browser away, with logs that help support get to the answer quickly.

Never lose a setup

Save the whole setup to one file and load it onto this panel or a replacement. Every file is checked before anything changes, and updates fall back to the working version on their own if one fails.

Smart Pi MIC Backup / Restore page: download the panel configuration, or restore one from an XML file
One file holds the whole setup: DSP, buttons and TALK colours, SIP, Dante mode and display settings.

Product summary

The specifications

Operator controlsEight physical zone buttons, dedicated TALK button and touchscreen
Destination organisationUp to 24 paging zones across three pages of eight keys; configurable labels and RGB colours
Network audioUp to eight Dante transmit channels in standalone/mixed operation, plus configured SIP destinations
Power and connectivityPower over Ethernet, so one network cable carries power, audio and control. Built-in switch with two RJ45 ports and two SFP slots for fibre on long cable runs
ControlAES70; individual DSP zone mapping; DSP Partnered panel control with compatible Smart Pi DSP support
Local monitoringSelected Dante return or local/SIP source, with speaker level and mute
Configuration and supportBrowser interface, shared-state virtual panel, XML backup/restore, service logs and firmware update interface

Every installation is different. Talk to us about your zones, DSP partnerships and network routing, and we will help you design the right paging system.

Works with

Smart Pi MIC is part of the Smart pi ECOsystem. These products share its network and interface.

Downloads